TO-5 and Centigrid relay families in DPDT latching and non-latching configurations with up to 10 million cycle life

JAN-qualified relay families per MIL-PRF-39016 and MIL-PRF-28776 at A, B, JAN-L, and JAN-M screening levels

High-temperature variants (412H series): -65 degrees C to +200 degrees C, vibration to 380 g's, 10 million cycle life, DPDT

High-shock variants (412K series): shock to 4,000 g's, -65 degrees C to +125 degrees C, DPDT latching and non-latching

Internal diode options: D suffix for coil transient suppression; DD suffix adds polarity reversal protection

TTL and CMOS driver variants: TN suffix for transistor driver; 122C with internal MOSFET driver for direct microprocessor control

Hermetically sealed all-welded construction provides moisture and contamination protection without secondary sealing in harsh operating environments

Precious metal contact alloys with gold plating deliver reliable switching across the full rated cycle life from dry circuit to 1A/28Vdc

Magnetic latching eliminates continuous coil current -- meaningful for battery-operated, low-power, or multi-relay designs where coil dissipation adds up

Internal diode options reduce external driver component count and board area while protecting relay driver circuits from back-EMF

QPL qualification provides documented supply chain assurance for programs that cannot accept unqualified components

A and B level screening, ground pin options, and additional spreader pad configurations give program engineers practical QPL flexibility

Defense avionics, missile electronics, and shipboard systems requiring JAN-qualified DPDT relays per MIL-PRF-39016 or MIL-PRF-28776

High-temperature aircraft engine control and airborne electronics applications requiring relays rated to +200 degrees C

High-shock munitions and pyrotechnic control systems requiring relays rated to 4,000 g shock pulses

RF signal routing and attenuator networks in ATE, communications, and EW systems using TO-5 RF relay variants

High-density PCB signal switching using Centigrid through-hole or surface-mount relay families

Low-power portable radio and handheld instrument transmit-receive switching using TO-5 latching relay designs

Standard contact load: Resistive: 1A/28Vdc; Inductive: 200mA/28Vdc; Lamp: 100mA/28Vdc; Low level: 10-50 uA/10-50 mVdc

JAN relay contact load: Resistive: 2A/28Vdc; A and B screening levels per MIL-PRF-39016 and MIL-PRF-28776

High-temperature (412H): -65 degrees C to +200 degrees C; vibration to 380 g's; 10 million cycle life; DPDT

High-shock (412K): Shock to 4,000 g's; -65 degrees C to +125 degrees C; DPDT latching and non-latching

Operate time (HR412 space): 2.0 ms maximum at rated coil voltage

Hermetic seal: 1 x 10-6 atm-cm3/s standard; 1 x 10-8 atm-cm3/s on HR255 space-grade series​